Here is one case with before/after and some protocol pictures of last weeks case.
With Injectable technique I trasfered my plan from the wax up to final composite restoration with transparent silicone and flowable composite.
Our primary goal was to reshape those centrals, but due to the function canines needed to be reshaped as well. Lateral incisors were slightly retruded so I decided to place veneers on those as well. In this case I preferred to do wax up in analog way. I did a bit more of secondary and tertiary morphology by wax carving to get more natural appearance of future veneers since they were don in single shade. With injectable technique there are different modifications how you can get polychromatic results but in this case I did all theet with single A1 shade.
After production of veneers we made patient hard acrylic Michigan splint.With our plan we reshaped function: new guidance and disabled patient to make movement that was causing this kind of wear during the daytime.
Materials: Exaclear (GC), Gaenial universal injectable (GC).
Hope you like the result.
Injectable technique is preictable and repeatabe concept that gives us chance to copy our plan from the wax up in all 3 dimensions to patients final restoration. If you want to find out more about Injectable technique check my page about Injectable technique:[https://web.facebook.com/100386114884914/posts/157540389169486/?_rdc=1&_rdr]
I prfer to cut sinlicon index following gingival line
I prefer to cut holes in index with tip of siringe of flowable composite
Share on:
